Click here to Enquire via Email for Pricing

Prepare your Jensen CV8 for the rigours of historic motorsport with this FIA/MSA specification 6-point weld-in roll cage. Specifically engineered for the unique structural requirements of the CV8, this comprehensive kit provides maximum driver protection and significantly increases chassis rigidity for competition use.

Product Specs

• Material: 45mm x 2.64mm Cold Drawn Seamless (CDS) steel tubing
• Specification: Fully compliant with FIA and MSA regulations
• Design: 6-point configuration with rear diagonal and door bars
• Inclusions: Main cage structure and bespoke lower subframe
• Installation: Requires professional welding and fabrication

Why Choose This Roll Cage?

• Superior Protection: Constructed from FIA-spec 45mm tubing to provide a robust safety cell capable of withstanding extreme racing stresses.
• Innovative Subframe Design: Includes a dedicated lower subframe that welds directly to the underside of the chassis, ensuring the cage is anchored to the strongest possible points.
• Enhanced Rigidity: By passing through the floor and connecting to the subframe, the cage effectively ties the entire chassis together, improving handling and predictability.
• Race Ready: Supplied with both a rear diagonal and door bars as standard, meeting the strict requirements for most historic racing formula.

Installation Tip: This is a comprehensive weld-in kit that requires advanced fabrication skills. The floor must be cut to allow the main tubes to reach the subframe; we recommend professional installation to ensure all welds meet the required safety standards for scrutineering.

Key Point: This kit is designed to be welded through the floor to a bespoke lower subframe for ultimate strength.

[A weld in 6 point roll cage for the Jensen CV8. Made from FIA specification 45mm tubing. Includes a lower subframe to be welded to the underside of the CV8 chassis. The main roll cage goes through the floor and welds to the subframe. This is a kit that requires welding. It includes a rear diagonal and door bars as per FIA and MSA specification.]

[6 point weld in roll cage]

[45mm x 2.64mm CDS tubing]

[Door bars and diagonal included.]